제품소개 > VULC' ORING > 비규격 연결오링

비규격 연결오링

별도의 금형제작없이, 고강도 고품질, 비규격, 초대형사이즈  오링 가능합니다.
NO TOOLING, HIGH QUALITY, NO UPPER SIZE LIMIT
연결오링이란 압출성형된 O-Ring Cord를 이용하여 연결 제작하는
오링을 말하며,순간 접착제등으로 단순 물리적 접착에 의한 Glued
O-Ring과 가류화접착(Vulcanization)으로 화학적 결합(분자 결합)
에 의해 연결 제작하는 Vulc Oring이 있으며, 일반 연결오링(Glued
O-Ring)은 작은 힘에도 쉽게 떨어지는데 반하여 NES VulcOring의
인장강도(Joint Tensile Strength) 는 금형으로 성형한 오링
(Mold O-Ring)의 인장강도에 가까우며 고품질 오링입니다.
VULC’ORING의 장단점
  • No Tooling Charge resulting in huge cost savings
  • No upper diameter limit like moulding
  • Tolerances can be closer than moulding (DIN 7715 M2F)
  • 성형오링과 같은 Parting line 이 없음
  • Joints strength 95 % of Cord strength.
  • Short lead times

단, 제작 가능한 최소 사이즈에 제한이 있으며,
수량이 많고 작은 사이즈의 오링일수록 금형오링에 비해 불리합니다.
(구매단가 높아짐).

Case Study : (NES) Northern Engineering (Sheffield) in U.K
  • Vacuum Sealing _ High precision transfer valve used in the semiconductor and photovoltaic market
NES’s Solution :
  • Products : Low outgassing FKM (VITON) VulcOrings
  • (ID 2500 x CS 6.0 mm)
  • Zero Risk of Contamination
  • To withstand Extreme Vacuum Pressure (10-7 bar)
  • Low Compression Set and Low outgassing
  • Argon Gas Packaging in clean room